Simple Transaction Builder

When calling a contract function on a Contract object, an incomplete Transaction object is returned. This transaction can be completed by providing a number of outputs using the to() or withOpReturn() functions. Other chained functions are included to set other transaction parameters.

Most of the available transaction options are only useful in very specific use cases, but the functions to(), withOpReturn() and send() are commonly used. withHardcodedFee() is also commonly used with covenant contracts.

Transaction options

to()

transaction.to(to: string, amount: bigint, token?: TokenDetails): this
transaction.to(outputs: Array<Recipient>): this

The to() function allows you to add outputs to the transaction. Either a single pair to/amount pair can be provided, or a list of them. This function can be called any number of times, and the provided outputs will be added to the list of earlier added outputs. Tokens can be sent by providing a TokenDetails object as the third parameter, or including it in your array of outputs with the .token property.

interface Recipient {
  to: string;
  amount: bigint;
  token?: TokenDetails;
}

interface TokenDetails {
  amount: bigint;
  category: string;
  nft?: {
    capability: 'none' | 'mutable' | 'minting';
    commitment: string;
  };
}

note

The CashScript SDK supports automatic UTXO selection for BCH and fungible CashTokens. However, if you want to send Non-Fungible CashTokens, you will need to do manual UTXO selection using from().

Example

.to('bitcoincash:qrhea03074073ff3zv9whh0nggxc7k03ssh8jv9mkx', 500000n)

withOpReturn()

transaction.withOpReturn(chunks: string[]): this

The withOpReturn() function allows you to add OP_RETURN outputs to the transaction. The chunks parameter can include regular UTF-8 encoded strings, or hex strings prefixed with 0x. This function can be called any number of times, and the provided outputs will be added to the list of earlier added outputs.

Example

.withOpReturn(['0x6d02', 'Hello World!'])

from()

transaction.from(inputs: Utxo[]): this

The from() function allows you to provide a hardcoded list of contract UTXOs to be used in the transaction. This overrides the regular UTXO selection performed by the CashScript SDK, so no further selection will be performed on the provided UTXOs. This function can be called any number of times, and the provided UTXOs will be added to the list of earlier added UTXOs.

tip

The built-in UTXO selection is generally sufficient. But there are specific use cases for which it makes sense to use a custom selection algorithm.

Example

.from(await instance.getUtxos())

fromP2PKH()

transaction.fromP2PKH(input: Utxo, template: SignatureTemplate): this;
transaction.fromP2PKH(inputs: Utxo[], template: SignatureTemplate): this;

The fromP2PKH() function allows you to provide a list of P2PKH UTXOs to be used in the transaction. The passed SignatureTemplate is used to sign these UTXOs. This function can be called any number of times, and the provided UTXOs will be added to the list of earlier added UTXOs.

Example

import { bobAddress, bobPrivateKey } from './somewhere';
import { ElectrumNetworkProvider, SignatureTemplate } from 'cashscript';

const provider = new ElectrumNetworkProvider();
const bobUtxos = await provider.getUtxos(bobAddress);

.fromP2PKH(bobUtxos, new SignatureTemplate(bobPrivateKey))

withFeePerByte()

transaction.withFeePerByte(feePerByte: number): this

The withFeePerByte() function allows you to specify the fee per per bytes for the transaction. By default the fee per bytes is set to 1.0 satoshis, which is nearly always enough to be included in the next block. So it's generally not necessary to change this.

Example

.withFeePerByte(2.3)

withHardcodedFee()

transaction.withHardcodedFee(hardcodedFee: bigint): this

The withHardcodedFee() function allows you to specify a hardcoded fee to the transaction. By default the transaction fee is automatically calculated by the CashScript SDK, but there are certain use cases where the smart contract relies on a hardcoded fee.

tip

If you're not building a covenant contract, you probably do not need a hardcoded transaction fee.

Example

.withHardcodedFee(1000n)

withMinChange()

transaction.withMinChange(minChange: bigint): this

The withMinChange() function allows you to set a threshold for including a change output. Any remaining amount under this threshold will be added to the transaction fee instead.

tip

This is generally only useful in specific covenant use cases.

Example

.withMinChange(1000n)

withoutChange()

transaction.withoutChange(): this

The withoutChange() function allows you to disable the change output. The remaining amount will be added to the transaction fee instead. This is equivalent to withMinChange(Number.MAX_VALUE).

caution

Be sure to check that the remaining amount (sum of inputs - sum of outputs) is not too high. The difference will be added to the transaction fee and cannot be reclaimed.

Example

.withoutChange()

withoutTokenChange()

transaction.withoutTokenChange(): this

The withoutTokenChange() function allows you to disable the change output for tokens.

caution

Be sure to check that the remaining amount (sum of inputs - sum of outputs) is not too high. The difference will be burned and cannot be reclaimed.

Example

.withoutTokenChange()

withAge()

transaction.withAge(age: number): this

The withAge() function allows you to specify the minimum age of the transaction inputs. This is necessary if you want to use the tx.age CashScript functionality. The age parameter passed into this function will be the value of tx.age inside the smart contract. For more information, refer to BIP68.

Example

.withAge(10)

withTime()

transaction.withTime(time: number): this

The withTime() function allows you to specify the minimum block number that the transaction can be included in. The time parameter will be the value of tx.time inside the smart contract.

tip

By default, the transaction's time variable is set to the most recent block number, which is the most common use case. So you should only override this in specific use cases.

Example

.withTime(700000)

Transaction building

send()

async transaction.send(): Promise<TransactionDetails>

After completing a transaction, the send() function can be used to send the transaction to the BCH network. An incomplete transaction cannot be sent.

interface TransactionDetails {
  inputs: Uint8Array[];
  locktime: number;
  outputs: Uint8Array[];
  version: number;
  txid: string;
  hex: string;
}

Example

import { alice } from './somewhere';

const txDetails = await instance.functions
  .transfer(new SignatureTemplate(alice))
  .withOpReturn(['0x6d02', 'Hello World!'])
  .to('bitcoincash:qrhea03074073ff3zv9whh0nggxc7k03ssh8jv9mkx', 200000n)
  .to('bitcoincash:qqeht8vnwag20yv8dvtcrd4ujx09fwxwsqqqw93w88', 100000n)
  .withHardcodedFee(1000n)
  .send()

build()

async transaction.build(): Promise<string>

After completing a transaction, the build() function can be used to build the entire transaction and return the signed transaction hex string. This can then be imported into other libraries or applications as necessary.

Example

const txHex = await instance.functions
  .transfer(new SignatureTemplate(alice))
  .to('bitcoincash:qrhea03074073ff3zv9whh0nggxc7k03ssh8jv9mkx', 500000n)
  .withAge(10)
  .withFeePerByte(10)
  .build()

debug() & bitauthUri()

If you want to debug a transaction locally instead of sending it to the network, you can call the debug() function on the transaction. This will return intermediate values and the final result of the transaction. It will also show any logged values and require error messages.

If you prefer a lower-level debugging experience, you can call the bitauthUri() function on the transaction. This will return a URI that can be opened in the BitAuth IDE. This URI is also displayed in the console whenever a transaction fails.

You can read more about debugging transactions on the debugging page.

caution

It is unsafe to debug transactions on mainnet as private keys will be exposed to BitAuth IDE and transmitted over the network.

Transaction errors

When sending a transaction, the CashScript SDK will throw an error if the transaction fails. If you are using an artifact compiled with cashc@0.10.0 or later, the error will be of the type FailedRequireError or FailedTransactionEvaluationError. In case of a FailedRequireError, the error will refer to the corresponding require statement in the contract code so you know where your contract failed. If you want more information about the underlying error, you can check the libauthErrorMessage property of the error.

interface FailedRequireError {
  message: string;
  contractName: string;
  requireStatement: { ip: number, line: number, message: string };
  inputIndex: number,
  libauthErrorMessage?: string,
  bitauthUri?: string;
}

If you are using an artifact compiled with an older version of cashc, the error will always be of the type FailedTransactionError. In this case, you can use the reason property of the error to determine the reason for the failure.

Transaction options​

to()​

Example​

withOpReturn()​

Example​

from()​

Example​

fromP2PKH()​

Example​

withFeePerByte()​

Example​

withHardcodedFee()​

Example​

withMinChange()​

Example​

withoutChange()​

Example​

withoutTokenChange()​

Example​

withAge()​

Example​

withTime()​

Example​

Transaction building​

send()​

Example​

build()​

Example​

debug() & bitauthUri()​

Transaction errors​

Transaction options

to()

Example

withOpReturn()

Example

from()

Example

fromP2PKH()

Example

withFeePerByte()

Example

withHardcodedFee()

Example

withMinChange()

Example

withoutChange()

Example

withoutTokenChange()

Example

withAge()

Example

withTime()

Example

Transaction building

send()

Example

build()

Example

debug() & bitauthUri()

Transaction errors